| NOTE:
|
AEC WILL PROVIDE ALL OF THE FOLLOWING SERVICES OR ANY
PORTION AS REQUIRED BY OUR CLIENTS. SEE INDIVIDUAL PROJECT PROPOSALS FOR
SERVICES TO BE PROVIDED.
|
|
COMPLETE ARCHITECTURAL & ENGINEERING DESIGN
|
| 1 -
|
INITIAL PROJECT ANALYSIS
A) Site Selection
B) Feasibility Studies
C) Preliminary Project Budgets
|
| 2 -
|
CONSTRUCTION DOCUMENTS
A) CAD Generated Drawings (AutoCAD R14)
B) Complete CSI Format Specifications
C) Bidding & Contractor Selection
D) Contract Administration
|
| 3 -
|
RECORD DRAWINGS
A) Up-Dated Drawings Complete With All Recorded Revisions.
B) Owners Maintenance Manuals
C) Punch List & Job Close-Out
|
| CONSTRUCTION CONSULTING AND ADMINISTRATION
|
| 1 -
|
ARCHITECT/DESIGNER SELECTION (IF OTHER THAN AEC)
A) Project Scope Drawings And Specifications.
B) Preliminary Project Budgets.
C) Bidding To Design Firms.
D) Selection And Supervision Of Design Firm.
|
| 2 -
|
PROJECT COST CONTROL
A) Monitor Architectural, Structural, Mechanical and
Electrical Designs (Compare Against Original Budget
At Key Design Phases).
B) Material And Systems Analysis.
C) Value Analysis Of Materials, Design And Systems.
|
| 3 -
|
BIDDING
A) Contractor Selection And Bidders List.
B) Bidding (Single and Multiple Phases).
|
| 4 -
|
CONSTRUCTION ADMINISTRATION
A) On-Site Supervision.
B) Contract Administration.
C) Weekly Project Meetings With Contractors.
D) Dispute Resolution.
|
| 5 -
|
PROJECT CLOSE-OUT
A) Obtain Record Drawings And Maintenance Manuals.
B) Final Project Inspections.
C) Punch List Completion.
|
|
INTERIOR DESIGN
|
| 1 -
|
SPACE NEEDS ANALYSIS
A) Individual Space And Equipment Needs
B) Working Relationships And Proximities
C) Determine Preliminary Department needs
|
| 2 -
|
PRELIMINARY INTERIOR LAYOUTS
A) Department/Personnel Locations
B) Support Area Sizes And Locations
C) Interior Finish Material Selection
D) Systems Furniture Selection And Layouts
E) Signage, Artwork, Etc. Selection
|
| 3 -
|
FINAL INTERIOR LAYOUTS
A) Finalize Interior Layouts And Department Locations
B) Interior Finish Color Selections And Color Boards
C) Bidding Of Systems Furniture, Signage, Artwork, Etc.
|
| 4 -
|
PROJECT CLOSE-OUT
A) Punch List For Finish Types And Quality
B) Inventory Furniture, Etc.
C) Record Drawings And Maintenance Manuals.
|
|
COMMUNITY PLANNING
|
| 1 -
|
PRELIMINARY NEEDS ANALYSIS
A) Conduct Interviews With Local Officials And Business Leaders To Determine Needs And Goals
B) Investigate Local Properties, Utilities, Access, Etc.
C) Review Existing Community Planning And Building Requirements
|
| 2 -
|
DEVELOP COMMUNITY PLANNING
A) Write Documents And Ordinances For:
1. Annexations
2. Subdivisions
3. Flood Plain
4. Wetlands
5. Zoning
6. Comprehensive Planning
B) Make Determinations
C) Make Contacts With The Appropriate Local, State Or Federal Official
Bodies Such As The
Department Of Natural Resources, Army Corps Of Engineers, Federal Emergency Management
Agency, Etc.
D) Hold Workshops For Plan Commissions And Board Of Adjustments/Appeals
|
| FORENSIC ENGINEERING
|
| 1 -
|
ACCIDENT INVESTIGATION
A) Site Investigation
B) Police/Fire Department Report Review
C) Generate Report
D) Professional / Expert Witness Testimony
|
| 2 -
|
FIRE INVESTIGATION
A) Site Investigation
B) Police/Fire Department Report Review
C) Generate Report
D) Professional / Expert Witness Testimony
|
| 3 -
|
CONTRACT DISPUTE RESOLUTION
A) Mediate Contract Disputes.
B) Review Of All Project Documentation.
C) Generate A Report Stating Our Opinion.
|
|
CONSTRUCTION INSPECTION
|
| 1 -
|
EXISTING FACILITY INSPECTION
A) Structural, Mechanical and Electrical Analysis.
B) ADA Survey and Recommendations.
C) CAD Drawings for Facility Management Needs.
D) Report With Recommendations on Facility Needs
and Conflicts with Current Codes.
|
| 2 -
|
IN PROGRESS CONSTRUCTION
A) Resolve
Change Order Disputes.
B) Verify Compliance with Bid Documents.
|
| 3 -
|
CONSTRUCTION DOCUMENTATION REVIEW
A) Review of Architectural, Structural, Mechanical and
Electrical Documents For Compliance with Owners
Needs and Budget.
B) Report Providing Recommended Revisions and/or
Corrections.
C) Code Compliance Review (State, Local and National).
|
| CAD DRAFTING SERVICES
(AutoCAD R14)
|
| 1 -
|
CONVERT EXISTING BUILDING DRAWINGS TO CAD
(ELECTRONIC) FORMAT
A) On-Site Verification of Existing Conditions.
|
| 2 -
|
SURVEY EXISTING BUILDINGS AND SYSTEMS
A) Draft Observable Conditions using AutoCAD Software.
|
| FACILITY MANAGEMENT CONSULTING
|
| 1 -
|
REGULAR SCHEDULED SITE AND BUILDING INSPECTIONS
A) File Reports for use in Facility Maintenance.
B) Assist in Long-term Facility Budget Planning.
|
| 2 -
|
EQUIPMENT/SYSTEMS LAYOUT
A) Review of Existing and Projected Operations and Material Flows.
B) Mechanical and Electrical Needs Analysis.
|
